Plastic Business Cards
For a card that lasts choose our plastic business card
Available as white or transparent 570� or 760� PVC and printed in full colour. You can opt for a range of special finishes too: gold foiling or silver foiling.
Specification
| Finished Size | 55mm x 85mm |
| Printed Sides | Single or Double Sided |
Artwork Requirements
| Bleed | 3mm All Round |
| Safe Zone | 3mm |
| Size with bleed | 91mm x 61mm |
| Resolution | 300 dpi minimum |
| Format | |
| Colour | CMYK |
| Fonts | Outlined or Embedded |
| Additional | Finished size is 85 x 54mm (91 x 60mm with 3mm bleed) with a corner radius of 3 mm. 3D Spot UV / Foiling cannot be placed outside of the 3mm safe zone 3D Spot UV / Foil artwork must be supplied as a vector artwork |
Please Note
If you are printing on one side of the card, then a 2-page PDF is required:
Page 1 is the CMYK artwork
Page 2 is the Foil/3D spot UV artwork
If you are printing a double-sided document, with foil / 3D UV on one side, please submit a 4-page PDF:
Page 1 is the front of the artwork
Page 2 is the back of the artwork
Page 3 is the foil artwork for the front
Page 4 is blank
The Foil/3D spot UV artwork should contain solid black shapes in the exact position where the special finish is required. Please ensure Foil/3D spot UV artwork is supplied as a vector and 100% black only and does not contain any cyan, magenta or yellow.
Foil application has registration tolerances of approximately plus or minus 0.5 mm. It is not therefore recommended that small text or thin lines are foiled as perfect register cannot be guaranteed. The minimum font size is 10pt and line weights should be at least 1pt.
